Foil Stamping and Die Cutting Machine PROGRESSOR 1300 F2

Equipped with:

  • Feeder: Using suction heads, this unit transports sheets from the pile to the machine in-feed
  • In-feed: Takes control of each individual sheet and registers it to the cutting/foil stamping tools using mechanical and dynamic registration
  • Platen section: This is the heart of the machine, bringing the cutting die and cutting plate together under pressure. Held between them, the sheet of substrate may be die-cut, creased or embossed, depending on the application and substrate
    The PROGRESSOR F2 is mainly designed as foil stamping machine, but can also be used as die cutter.
    We recommend the option: Chase changer (integrated into the working platform)
  • Delivery: The delivery aligns the sheets and creates a pile of full sheets.
  • max. sheet size: 1300 x 950 mm

 

PROGRESSOR 1300D2 mm inches
Max. sheet size  1300 x 950 51.18 x 37.4
Min. sheet size 550 x 450 21.65 x 17.71
Max. die-cutting size 1260 x 920 49.60 x 36.22
Die size 1340 x 960 52.75 x 37.8
Cutting plate 4 + 1 0.15 + 0.039
Gripper margin 7 – 17 0.27 – 0.67
Carton board g/m² 90 – 2.000
Carton board 0.1 – 3 0.0004 – 0.11
Corrugated board <= 4 <= 0.157
Max. cutting force in t 450
Max. die-cutting speed in sheets / hour 5000
Feeder pile height (incl. pallet) 1600 62.99
Delivery pile height (incl. pallet) 1350 53.14
Temperature zones individually controlled 20
Temperature in Celsius 20 – 200
Overall machine size (L x W x H) 7135 x 5660 x 2480 2880.90 x 222.83 x 97.63