360-219-7072 [email protected]

Flatbed Die Cutter PROGRESSOR 800 DS

Equipped with stripper:

  • Feeder: Using suction heads, this unit transports sheets from the pile to the machine in-feed
  • In-feed: Takes control of each individual sheet and registers it to the cutting tools using mechanical and dynamic registration
  • Platen section: This is the heart of the machine, bringing the cutting die and cutting plate together under pressure. Held between them, the sheet of substrate may be die-cut, creased or embossed, depending on the application and substrate
  • Stripping section: Internal waste, and sometimes side and rear trim, is removed using an upper stripping tool, central stripping board, and, in some tooling arrangements, lower stripping pins
  • Delivery: The delivery aligns the sheets and creates a pile of full sheets.
  • max. sheet size: 800 x 600 mm

 

PROGRESSOR 800DS mm inches
Max. sheet size  800 x 600 31.5 x 23.6
Min. sheet size 300 x 260 11.8 x 10.23
Max. die-cutting size 785 x 585 30.9 x 23
Die size 840 x 620 33 x 24.4
Cutting plate 3 + 1 0.11 + 0.039
Gripper margin 7 – 17 0.27 – 0.67
Carton board g/m² 90 – 2.000
Carton board 0.1 – 3 0.0004 – 0.11
Corrugated board <= 4 <= 0.157
Max. cutting force in t 150
Max. die-cutting speed in sheets / hour 7500
Feeder pile height (incl. pallet) 1300 51.18
Delivery pile height (incl. pallet) 1050 41.33
Overall machine size (L x W x H) 5510 x 3620 x 2150 216.9 x 142.5 x 84.6

Progressor feeding table

Progressor cutting chase pneum. locksystem

Progressor touchscreen