Foil Stamping Machine PROGRESSOR 1060 FF

Equipped with:

  • Feeder: Using suction heads, this unit transports sheets from the pile to the machine in-feed
  • In-feed: Takes control of each individual sheet and registers it to the cutting/foil stamping tools using mechanical and dynamic registration
  • Platen section: This is the heart of the machine, bringing the cutting die and cutting plate together under pressure. Held between them, the sheet of substrate may be die-cut, creased or embossed, depending on the application and substrate
    The PROGRESSOR FF contains2 separate foil stamping sections with 300 tons maximum pressure each section
  • Delivery: The delivery aligns the sheets and creates a pile of full sheets
  • max. sheet size: 1060 x 760 mm

 

PROGRESSOR 1060F mm inches
Max. sheet size  1060 x 760 41.7 x 29.9
Min. sheet size 450 x 370 17.7 x 14.56
Max. die-cutting size 1040 x 740 40.94 x 29.13
Die size 1020 x 740 40.15 x 29.13
Cutting plate 3 + 1 0.11 + 0.039
Gripper margin 7 – 17 0.27 – 0.67
Carton board g/m² 90 – 2.000
Carton board 0.1 – 3 0.0004 – 0.11
Corrugated board <= 4 <= 0.157
Max. cutting force in t 300
Max. die-cutting speed in sheets / hour 5000
Feeder pile height (incl. pallet) 1600 62.99
Delivery pile height (incl. pallet) 1350 53.14
Overall machine size (L x W x H) 6265 x 4350 x 2580 246.65 x 171.25 x 101.57