Flatbed Die Cutter PROGRESSOR 1300 DS2

Equipped with stripper:

  • Feeder: Using suction heads, this unit transports sheets from the pile to the machine in-feed
  • In-feed: Takes control of each individual sheet and registers it to the cutting tools using mechanical and dynamic registration
  • Platen section: This is the heart of the machine, bringing the cutting die and cutting plate together under pressure. Held between them, the sheet of substrate may be die-cut, creased or embossed, depending on the application and substrate
  • Stripping section: Internal waste, and sometimes side and rear trim, is removed using an upper stripping tool, central stripping board, and, in some tooling arrangements, lower stripping pins
  • Delivery: The delivery aligns the sheets and creates a pile of full sheets.
  • max. sheet size: 1300 x 950 mm

 

PROGRESSOR 1300D2 mm inches
Max. sheet size  1300 x 950 51.18 x 37.4
Min. sheet size 550 x 450 21.65 x 17.71
Max. die-cutting size 1285 x 935 50.59 x 36.8
Die size 1340 x 960 52.75 x 37.8
Cutting plate 4 + 1 0.15 + 0.039
Gripper margin 7 – 17 0.27 – 0.67
Carton board g/m² 90 – 2.000
Carton board 0.1 – 3 0.0004 – 0.11
Corrugated board <= 4 <= 0.157
Max. cutting force in t 450
Max. die-cutting speed in sheets / hour 6500
Feeder pile height (incl. pallet) 1600 62.99
Delivery pile height (incl. pallet) 1350 53.14
Overall machine size (L x W x H) 7145 x 5460 x 2430 281.29 x 167.3 x 95.67

Progressor feeding table

Progressor cutting chase pneum. locksystem

Progressor touchscreen