Foil Stamping Machine PROGRESSOR 1060 FF+
Equipped with:
- Feeder: Using suction heads, this unit transports sheets from the pile to the machine in-feed
- In-feed: Takes control of each individual sheet and registers it to the cutting/foil stamping tools using mechanical and dynamic registration
- Platen section: This is the heart of the machine, bringing the cutting die and cutting plate together under pressure. Held between them, the sheet of substrate may be die-cut, creased or embossed, depending on the application and substrate
The PROGRESSOR FF+contains 2 separate foil stamping sections in row with 500 tons maximum pressure on the first station and 300 tons maximum pressure on second section
- Delivery: The delivery aligns the sheets and creates a pile of full sheets
- max. sheet size: 1060 x 760 mm
PROGRESSOR 1060F | mm | inches |
Max. sheet size | 1060 x 760 | 41.7 x 29.9 |
Min. sheet size | 450 x 370 | 17.7 x 14.56 |
Max. die-cutting size | 1040 x 740 | 40.94 x 29.13 |
Die size | 1020 x 740 | 40.15 x 29.13 |
Cutting plate | 3 + 1 | 0.11 + 0.039 |
Gripper margin | 7 – 17 | 0.27 – 0.67 |
Carton board g/m² | 90 – 2.000 | |
Carton board | 0.1 – 3 | 0.0004 – 0.11 |
Corrugated board | <= 4 | <= 0.157 |
Max. cutting force in 1st and 2nd stamping unit in t | 500 / 350 | |
Max. die-cutting speed in sheets / hour | 5000 | |
Feeder pile height (incl. pallet) | 1600 | 62.99 |
Delivery pile height (incl. pallet) | 1350 | 53.14 |
Temperature zones individually controlled | 20 | |
Temperature in Celsius | 20 – 200 | |
Overall machine size (L x W x H) | 6265 x 4350 x 2580 | 246.65 x 171.25 x 101.57 |