Foil Stamping and Die Cutting Machine PROGRESSOR 800 F
Equipped with:
- Feeder: Using suction heads, this unit transports sheets from the pile to the machine in-feed
- In-feed: Takes control of each individual sheet and registers it to the cutting/foil stamping tools using mechanical and dynamic registration
- Platen section: This is the heart of the machine, bringing the cutting die and cutting plate together under pressure. Held between them, the sheet of substrate may be die-cut, creased or embossed, depending on the application and substrate
The PROGRESSOR F is mainly designed as foil stamping machine, but can also be used as die cutter.
We recommend the option: Chase changer (integrated into the working platform)
- Delivery: The delivery aligns the sheets and creates a pile of full sheets.
- max. sheet size: 800 x 600 mm
| PROGRESSOR 800D | mm | inches |
| Max. sheet size | 800 x 600 | 31.5 x 23.6 |
| Min. sheet size | 300 x 260 | 11.8 x 10.23 |
| Max. die-cutting size | 760 x 580 | 29.9 x 22.83 |
| Die size | 840 x 620 | 33.07 x 24.4 |
| Cutting plate | 3 + 1 | 0.11 + 0.039 |
| Gripper margin | 7 – 17 | 0.27 – 0.67 |
| Carton board g/m² | 90 – 2.000 | |
| Carton board | 0.1 – 3 | 0.0004 – 0.11 |
| Corrugated board | <= 4 | <= 0.157 |
| Max. cutting force in t | 150 | |
| Max. die-cutting speed in sheets / hour | 6500 | |
| Feeder pile height (incl. pallet) | 1300 | 51.18 |
| Delivery pile height (incl. pallet) | 1050 | 41.33 |
| Overall machine size (L x W x H) | 5510 x 3760 x 2350 | 216.92 x 148.03 x 902.51 |