360-219-7072 [email protected]

Flatbed Die Cutter PROGRESSOR 1060 TDS

Equipped with stripper and double cam gripper bar unit:

  • Feeder: Using suction heads, this unit transports sheets from the pile to the machine in-feed
  • In-feed: Takes control of each individual sheet and registers it to the cutting tools using mechanical and dynamic registration
  • Platen section: This is the heart of the machine, bringing the cutting die and cutting plate together under pressure. Held between them, the sheet of substrate may be die-cut, creased or embossed, depending on the application and substrate
  • Stripping section: Internal waste, and sometimes side and rear trim, is removed using an upper stripping tool, central stripping board, and, in some tooling arrangements, lower stripping pins
  • Delivery: The delivery aligns the sheets and creates a pile of full sheets.
  • With high-speed double cam gripper bar unit
  • max. sheet size: 1060 x 760 mm

 

PROGRESSOR 1060D mm inches
Max. sheet size  1060 x 760 41.7 x 29.9
Min. sheet size 400 x 370 15.74 x 14.56
Max. die-cutting size 1045 x 745 41.14 x 29.33
Die size 1075 x 765 42.32 x 30.11
Cutting plate 3 + 1 0.11 + 0.039
Gripper margin 7 – 17 0.27 – 0.67
Carton board g/m² 90 – 2.000
Carton board 0.1 – 3 0.0004 – 0.11
Corrugated board <= 4 <= 0.157
Max. cutting force in t 300
Max. die-cutting speed in sheets / hour 8000
Feeder pile height (incl. pallet) 1800 70.86
Delivery pile height (incl. pallet) 1400 55.11
Overall machine size (L x W x H) 7800 x 4720 x 2700 307.08 x 185.82 x 106.29

Progressor Mabeg feederhead

Progressor cutting chase pneum. locksystem

Progressor double cam gripper bar

Progressor cutting chase changer

Progressor 19″ touchscreen

Progressor automatic central lubrication pump